Chili Red Glitter Paint Additive
Out of stock
Recommended ratio: 100g glitter to 1.5L of paint
Step 1: Open your pot of emulsion paint
Step 2. Pour glitter flakes into the paint
Step 3: Stir the glitter flakes into the paint for 3-5min.
Use a circular stirring motion, lifting up and sown as you stir
Step 4: Apply the 1st paint coat to the surface using a roller or brush. If using with wood varnish, apply using a brush
Step 5: Wait for the paint to dry and after apply the 2nd coat. Apply 3rd if necessary, although 2 coats
Is often adequate
Step 6: Lightly bluff the dried surface using paint buffing pads or nylon scourer to increase glitter coverage
Use higher-sheen finish product such as silk, mid-sheen of gloss. This will give a great glitter sparkle effect
*We highly recommend you do a trial test by adding a small
Quantity of glitter into your desired paint.
Once mixed apply on to your chosen surface to see if meets your expectations before carrying out your full project.
We take no responsibility for how you use this product.
Apply slowly and carefully
To avoid: Using with acrylic eggshell, one-coat kitchen and bathrooms paints
Do not consume
Keep out of reach of children